Go-Lite 4-way Manual Controller with Flash

Price: $139.00

Item Number: K102

This item drop ships from the manufacturer.

Quantity:

The GAM GO-LITE system goes wherever you need it, the Green Room, in the flies, on the apron of your stage, on scenery, in the orchestra pit. Four colors; white, red, blue, and green, offer you a variety of different cuing combinations for multiple functions and/or performers. Use the GO-LITE as a guide or to illuminate dark areas.

The GO-LITE system consists of three components. The GO-LITE 4-way Manual Controller, the GO-LITE Cube with 4 Colors and RJ-11 cables of various lengths.

Easily mounted anywhere - screwed in, nailed in, tapped up, velcro or into an electrical junction box
Dependendable
Highly Visible
Brilliantly Effective
Link up to 30 or more in series

The GAM GO-LITE Manual Controller with Flash Option has four "On"/"Off" switches to control each of the LEDs, white, red, blue and green, in that sequence. Any one or combination of LEDs can be turned "On" or "Off" with these switches. The color LED you have selected is shown by the indicator light mounted above the switch. Select the Flash Mode or Constant On Mode in the upper right hand corner. The flash selector switch applies to all four circuits.

There are two RJ-25 sockets marked "A" and "B". Start by using the "A" socket of the Manual Controller and wiring to the first GO-LITE cube's "IN" receptacle. Continue to wire a series by connecting the "OUT" to the "IN" of the next GO-LITE cube in your series.

The RJ-25 "B" receptacle has two possible applications:
- Alternate 1. You could run a second string of GAM GO-LITE cubes from the "B" connector to the "OUT" connector reversing the wiring sequence described above. Both lines would be operating when you select any of the LEDs and the color selection would be the same on both lines of the GO-LITES.
- Alternate 2. It is possible that you have strung a series of GAM GO-LITE cubes starting at stage right and terminating at stage left. You could unplug the Manual Controller, stage right from the "A" terminal, move it to the ending point of the series stage left and plug the last cube's "OUT" receptacle into the Manual Controller's "B" receptacle. Now you can operate the same string of LEDs from stage left.
**CAUTION: Never plug both ends in at the same time.

The GAM GO-LITE Manual Controller is supplied with a 90 to 230VAC to 12 volt DC Power Supply. Plug the 2.1 MMDC connector to the 12 volt DC outlet on the Manual Controller and then plug the Power Supply into 120 or 230 volt AC outlet. Be sure that all the switches are in the "Off" position. None of the LED display lights should be lit at this point, however the green power indicator light just above the 12 volt DC connection should light to show that you have power.

**CAUTION: If you accidentally reverse the one or more GO-LITE cube connection, that unit will not respond correctly as well as the entire GO-LITE SYSTEM. If red and blue indicator lights come on when all switches are in "Off" position, one or more of the GAM GO-LITE cubes are incorrectly connected. In addition to the two lights on the Controller, the blue LEDs of each incorrectly wired cube lights. This will quickly identify which cube is miswired. (CAUTION - Do not leave the Power Supply on for long periods of time with incorrectly wired cubes, damage may occur)